Our Director of Engineering Dave Binz describes how the Cambridge team approaches an industrial retrofit process, and the best way to get started getting answers about your project.

We, at Cambridge are frequently involved with heating “spec” buildings. You know how it goes: a developer puts up the shell, pours the concrete slab, heats the building to a minimum temperature the closes it up with no plans for ventilation. At some point in the future, the developer signs up a tenant and proceeds with the tenant fit-out. That is where our story begins.

Cambridge S-Series heaters can be installed in a variety of configurations. When considering industrial retrofit projects, there are several considerations that should be taken into account.

For years we have worked with an industrial retrofit contractor. He often installed vertical S-Series heaters in locations where space was at a premium, both indoors and outdoors. Since Cambridge did not provide a stand for vertical units, he had a structural engineer design a four-legged stand made from 2” x 2” square tubing. The legs would be cut to length in the field and a base plate welded to the leg.