you might have a small building with just basic heating needs. Or you might have a large facility that has mechanical exhaust and you need equipment that provides both exhaust replenishment and heating. Either way, knowing which products you need to provide the best indoor air quality for your facility is not always cut and dry. So take a minute and read over the infographic below.

Patten CAT is a 4th generation Caterpillar sales and service organization that began back in 1933. Their relationship with Cambridge Engineering heating products started in 2005 when they purchased their first Cambridge S-Series unit to retrofit a less efficient heating system at their Oglesby, IL location. Fast forward 12 years later and Patten has over 25 Cambridge units heating 6 of their locations throughout the Chicagoland area.

For the facility’s unique processes and requirements, your team has designed and optimized every aspect of your operation. This optimization has become a minimum requirement for continued operation. But utilities and your HVAC systems are often thought of as ancillary systems. They become outdated and even neglected, despite this optimization of processes.

Direct-fired 100% outside air systems provide controls to operate either continuously or intermittently based on occupancy schedule, process conditions, pressure, or any number of other control requirements. There are actually three primary modes of operation for these HTHV 100% Outside Air Technologies: Ventilation/Exhaust Replenishment  Space Heat & Ventilation Space Heat

Industrial facilities today don’t have to be new in order to be efficient Leading facility owners and operators are retrofitting existing facilities into models of efficiency and sustainability. Industrial facility retrofits are investments in efficient technologies that span all facility systems, including lighting, facility envelope, and HVAC. While most facility owners still pursue single technology improvements, market leaders bundle together energy saving technologies in a more comprehensive approach to get deeper savings and greater lifecycle value.

We recently heard some great news from our tax advisors: Cambridge Engineering customers can immediately deduct 50 percent of the cost of our HVAC equipment when it is installed as a retrofit in a commercial building. The new rule applies to a variety of building improvements and renovations made in 2016 and 2017 – and HVAC equipment is included as an eligible deduction. This is a big win for building owners! If you’ve been considering replacing your facility’s old or inefficient space heating and ventilation equipment, now is the time to do it.  The 50 percent “bonus deduction” will taper down to lower percentages after 2017, and will go away completely in 2020.